uaea apamemea vasega vevela C / 200 * C ANSI TYPE MW35C poʻo le IEC 317-13. Polyester-imide ma polyamide-imide fa'apipi'i fa'alua enameled Uaea ta'amilo
uaea apamemea vasega vevela C/ 200*C ANSI ITIGA MW35C poʻo le IEC 317-13. Polyester-imide mapolyamide-imideuaea fa'afefeteina fa'aulu lua
Fa'amatalaga o oloa
O nei uaea tetee enamled ua faʻaaogaina lautele mo resistors masani, taavale
vaega, taamilomilo tetee, ma isi e faaaoga ai lefa'amavaegafa'agaioiga e sili ona fetaui mo nei fa'aoga, fa'aaoga lelei atoatoa uiga iloga o le fa'auluina enamel.
E le gata i lea, o le a matou faia le ufiufi enamelfa'amavaegao uaea u'amea taua e pei o le ario ma le uaea platinum i luga o le poloaiga. Fa'amolemole fa'aaoga lenei gaosiga-i-oka.
Ituaiga ole Uaea Nichrome
NiCr80/20,NiCr70/30,NiCr60/15,NiCr90/10,NiCr35/20,NiCr30/20
Ituaiga Insulation
| Insulation-enamelled Igoa | Tulaga vevelaºC (taimi faigaluega 2000h) | Code Igoa | GB Code | ANSI. ITIGA |
| Polyurethane enamelled uaea | 130 | UEW | QA | MW75C |
| Uaea enamel polyester | 155 | PEW | QZ | MW5C |
| Polyester-imide uaea enamelled | 180 | EIW | QZY | MW30C |
| Polyester-imide ma polyamide-imide uaea fa'apipi'i fa'apipi'i lua | 200 | EIWH (DFWF) | QZY/XY | MW35C |
| Polyamide-imide uaea enamelled | 220 | AIW | QXY | MW81C |
Ituaiga o Uaea Alloy e leai ni mea
O le u'amea e mafai ona tatou faia enamelled o uaea u'amea-nikeli, uaea Constantan, uaea Manganin. Kama Wire,NiCr Alloy wire,FeCrAl Alloy wire etc
| autu meatotino ituaiga | Cuni1 | CuNI2 | CuNI6 | CuNi8 | CuNI10 | CuNi14 | CuNi19 | CuNi23 | CuNi30 | CuNi34 | CuNI44 | ||
| autu vaila'au fatuga | Ni | 1 | 2 | 6 | 8 | 10 | 14.2 | 19 | 23 | 30 | 34 | 44 | |
| MN | / | / | / | / | / | 0.3 | 0.5 | 0.5 | 1.0 | 1.0 | 1.0 | ||
| CU | malolo | malolo | malolo | malolo | malolo | malolo | malolo | malolo | malolo | malolo | malolo | ||
| maualuga galue vevela | / | 200 | 220 | 250 | 250 | 300 | 300 | 300 | 350 | 350 | 400 | ||
| mafiafia g/cm3 | 8.9 | 8.9 | 8.9 | 8.9 | 8.9 | 8.9 | 8.9 | 8.9 | 8.9 | 8.9 | 8.9 | ||
| teteega i le 20 °c | 0.03 ± 10% | 0.05± 10% | 0.10± 10% | 0.12± 10% | 0.15± 10% | 0.20± 5% | 0.25± 5% | 0.30± 5% | 0.35± 5% | 0.40± 5% | 0.49± 5% | ||
| vevela coefficient o tetee | <100 | <120 | <60 | <57 | <50 | <38 | <25 | <16 | <10 | -0 | <-6 | ||
| mālosi malosi mpa | >210 | >220 | >250 | >270 | >290 | >310 | >340 | >350 | >400 | >400 | >420 | ||
| faaumiumi | >25 | >25 | >25 | >25 | >25 | >25 | >25 | >25 | >25 | >25 | >25 | ||
| liusuavai mata °c | 1085 | 1090 | 1095 | 1097 | 1100 | 1115 | 1135 | 1150 | 1170 | 1180 | 1280 | ||
| coefficient o conductivity | 145 | 130 | 92 | 75 | 59 | 48 | 38 | 33 | 27 | 25 | 23 |
nicr8020 uaea faamafanafana
1.About uaea Nichrome
Nichrome alloy e aofia ai le nickel mama, NiCr alloy, Fe-Cr-Al alloy ma le kopa nickel alloy.
Nikeli chrome alloys: Ni80Cr20, Ni70Cr30, Ni60Cr15, Ni35Cr20, Ni30Cr20, Cr25Ni20, nickel mama Ni200 ma Ni201
2.Main Advantage ma le Faʻaaogaina
1. Nickel-chromium, nickel-chromium alloy ma le maualuga ma le mausali teteʻe, corrosion teteʻe, luga oxidation tetee e lelei, a sili atu i lalo o le vevela maualuga ma seismic malosi, ductility lelei, lelei workability ma weldability.
2.Our Products e faʻaaogaina lautele i vailaʻau kemisi, masini metallurgy, alamanuia tioata, alamanuia ceramic, nofoaga meafaigaluega fale ma isi.
3. Le tuufaatasiga o vailaau:
| Fa'ailoga | Fa'ameamea | Si | Cr | Ni | Al | Fe | |||
| C | P | S | Mn | ||||||
| E le sili atu | |||||||||
| Cr20Ni80 | 0.08 | 0.020 | 0.015 | 0.60 | 0.75-1.60 | 20.0-23.0 | tumau | ≤0.50 | ≤1.0 |
| Cr15Ni60 | 0.08 | 0.020 | 0.015 | 0.60 | 0.75-1.60 | 15.0-18.0 | 55.0-61.0 | ≤0.50 | tumau |
| Cr20Ni35 | 0.08 | 0.020 | 0.015 | 1.00 | 1.00-3.00 | 18.0-21.0 | 34.0-37.0 | - | tumau |
| Cr20Ni30 | 0.08 | 0.020 | 0.015 | 1.00 | 1.00-2.00 | 18.0-21.0 | 30.0-34.0 | - | tumau |
A oʻo le oloa i le tulaga "M", e tatau ona mulimulitaʻia le tulaga masani GB / T1234-1995
Resistivity:
| Fa'ailoga | Cr20Ni80 | Cr20Ni60 | Cr20Ni35 | Cr20Ni30 | ||
| Ole mita mm | <0.50 | 0.50-3.0 | <0.50 | ≥0.50 | <0.50 | ≥0.50 |
| resistivity(20°C)uΩ·m | 1.09±0.05 | 1.13±0.05 | 1.12±0.05 | 1.15±0.05 | 1.04±0.05 | 1.06±0.05 |
