apamemea nickel alloy/ CuNi23 (NC030)
Cuni23 (NC030) Strip/Foil/ Maulalo Cuni Alloy
Fa'amatalaga o oloa
CuNi23Mn e maualalo le tetee fa'avevela u'amea o lo'o fa'aaogaina lautele i le va'ava'a va'ava'a eletise maualalo, fa'avevela vevela vevela, ma isi oloa eletise maualalo.O se tasi o mea taua o oloa eletise maualalo-voltage.O mea e gaosia e la matou kamupani o loʻo i ai uiga o le lelei o le teteʻe ma le mautu maualuga.E mafai ona matou tuʻuina atu ituaiga uma o uaea lapotopoto, mea mafolafola ma laupepa.
O mea tau vaila'au,%
| Ni | Mn | Fe | Si | Cu | Isi | RoHS Directive | |||
| Cd | Pb | Hg | Cr | ||||||
| 23 | 0.5 | - | - | Bal | - | ND | ND | ND | ND |
Meatotino Fa'ainisinia
| Max Auaunaga Fa'aauau Temp | 250ºC |
| Resisivity ile 20ºC | 0.35%ohm mm2/m |
| Malosi | 8.9 g/cm3 |
| Amioga vevela | 16(Max) |
| Lisi Lisi | 115ºC |
| Malosi Tensile,N/mm2 Fa'amau, Malu | 270~420 Mpa |
| Malosi Tensile,N/mm2 Cold Rolled | 350~840 Mpa |
| Fa'aliga | 25% (Max) |
| Elongation(fa'a'ai malulu) | 2% (Max) |
| EMF vs Cu, μV/ºC (0~100ºC) | -25 |
| Fa'asologa o Micrographic | austenite |
| Meatotino maneta | Leai |
CuNi23Mn Fefa'ataua'iga:
Alloy 180, CuNi 180, 180 Alloy, MWS-180, Cuprothal 180, Midohm, HAI-180, Cu-Ni 23, Alloy 380, Nickel alloy 180
Resistance Alloy 180 - CuNi23Mn Sizes / Temper Capabilities
Tulaga: Malamalama, faʻapipiʻi, malu
Uaea lautele 0.02mm-1.0mm fa'apipi'i i totonu, lapoa nai lo le 1.0mm fa'apipi'i i totonu
O'oto'o, Pa ta'amilosaga 1mm-30mm
Aveese: Mafiafia 0.01mm-7mm, Lautele 1mm-280mm
E maua le tulaga enameled
